JAW CRUSHERS
P |
E |
|
|
XX |
XX |
Crusher |
Jaw
Crusher |
E-Double
toggle F- Single toggle |
X–
Fine crushing J-Used
under mine |
Feed
open width(mm/100) |
Feed
open length(mm/100) |
Type |
PEF0204 |
PEF-X0207 |
PEF-X0210 |
PEF-X0212 |
Size |
250×400 |
250×750 |
250×1000 |
250×1200 |
Feed
opening (mm) |
250×400 |
250×750 |
250×1000 |
250×1200 |
Max
feed lump size (mm) |
210 |
210 |
210 |
210 |
Setting
adjustment range (mm) |
20-60 |
20-60 |
20-60 |
15-50 |
Capacity
(m3/h) |
5-20 |
20 |
10-23 |
13-38 |
Motor
Type |
Y180L-5 |
Y225M-6 |
Y2805-6 |
Y280S-8 |
Power
(KW) |
15 |
30 |
37 |
37 |
Voltage
(V) |
380 |
380 |
380 |
380 |
Machinery
Weight (tons) |
2.325 |
6.3 |
7.72 |
7.5 |
Overall
dimension (m) |
103×1.02×1.14 |
1.48×1.91×1.5 |
1.48×2.34×1.54 |
1.6×2.2×1.3 |
Type |
PEF0406 |
PEF0507 |
PEF0609 |
PEF0710 |
PEF0912 |
Size |
400×600 |
500×750 |
600×900 |
750×1060 |
900×1200 |
Feed
opening (mm) |
400×600 |
500×750 |
600×900 |
750×1060 |
900×1200 |
Max
feed lump size (mm) |
340 |
400 |
500 |
630 |
750 |
Setting
adjustment range (mm) |
60±30 |
75±25 |
100±25 |
110±30 |
130±35 |
Capacity
(m3/h) |
18 |
40.5 |
60 |
110 |
130 |
Motor
Type |
Y225M-6 |
YR280M-6 |
JR75-8 |
YR280M-6 |
JR126-8 |
Power
(kw) |
30 |
50 |
75 |
90 |
110 |
Voltage
(V) |
380 |
380 |
380 |
380 |
380 |
Machinery
Weight (tons) |
6.56 |
10.57 |
16.9 |
24.01 |
44.13 |
Overall
dimension (m) |
1.56×1.74×1.59 |
3.50×1.94×2.21 |
2.57×3.72×2.37 |
3.1×2.6×2.95 |
5.00×4.47×3.28 |
Crusher
Capacities The
capacity figures shown apply to material weighing 100 pounds per cubic foot
or 1600 kg per cubic meter. The crusher is one component of the circuit. As
such, its performance is in part dependent on the proper selection and
operation of feeders, conveyors, screens, supporting structure, electric
motors, drive component and surge bins. Where used, attention to the
following factors will enhance crusher capacity and performance. 1. Proper selection of crushing chamber for material to be crushed. 2. A feed grading containing proper distribution of the
particle size. 3. Controlled feed rate. 4. Proper feed distribution 360° around crushing
chamber. 5. Discharge conveyor sized to carry maximum crusher
capacity. 6. Properly sized scalping and closed circuit screens. 7. Automation controls. The following factors will detract from crusher capacity and
performance. 1. Sticky material in crusher feed. 2. Fines in crusher feed (smaller than crusher setting)
exceeding 10% of crusher capacity. 3. Excessive feed moisture. 4. Feed segregation in crusher cavity. 5. Improper feed distribution around circumference of
crusher cavity. 6. Lack of feed control. 7. Inefficient use of recommended connected horsepower. 8. Insufficient conveyor capacity. 9. Insufficient scalper and closed circuit screen
capacities. 10. Insufficient crusher discharge area. 11. Extremely hard or tough material. 12. Operation of crusher at less than recommended full
load countershaft
speed. Low installation and operating costs In addition to bringing you high performance,
our jaw crushers are also designed to bring your total crushing costs down.
Each unique feature of our crushers brings specific benefits that have a
direct impact on the bottom line – which means that you will be more
profitable. Fast and safe setting adjustment
systems Our crushers are equipped with
a proven, rugged and fast wedge setting adjustment system. The crusher's setting can be
manually adjusted with standard tools in a matter of minutes. Alternatively, the crusher's
setting can be changed in Seconds. The system is also especially effective
at clearing the crusher's cavity should it stall under load due to
interruptions in the supply of electric power. Features 1.
Simple Design, easy maintenance. Operating principle The Jaw
crusher is driven by an electric motor. Through the motor’s wheels, the
eccentric shaft is driven by the triangle belt and slot wheel to make the
movable jaw plate move by a regulated track. Therefore, the materials in
the crushing cavity, which is composed of fixed jaw plate, movable jaw
plate and side-lee board, can be crushed and discharged through the
discharging opening.
2. Stable performance.
3. Even final particles and high crushing ratio.